Milan Tica
redovni profesor
Nastavnik - II-4
Faculty of Mechanical Engineering
051/433-039
Department
- Mašinski fakultet - Katedra za mehaniku i konstrukcije
Courses
Faculty of Mechanical EngineeringBibliography
Journal papers
An Analysis of the Influence of Surface Roughness and Clearance on the Dynamic Behavior of Deep Groove Ball Bearings Using Artificial Neural Networks
| DOI | https://doi.org/10.3390/ ma16093529 |
|---|---|
| Journal | Materials |
| Year | 2023 |
| Authors | Ivan Knežević, Milan Rackov, Ana Buljević, Aco Antić, Ž Kanović, Milan Tica, and Aleksandar Živković |
| Volumen | 3523 |
| Number | 16 |
| Web address | https://doi.org/10.3390/ ma16093529 |
Reliability Evaluation of Transmission Planetary Gears “bottom-up” approach,
| DOI | https://doi.org/10.17531/ein.2023.1.2 |
|---|---|
| Journal | EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY |
| Year | 2023 |
| Authors | Predrag Živković, Miroslav Milutinović, Milan Tica, Spasoje Trifković, and Ivica Čamagić |
| Volumen | 25 |
| Number | 1 |
| Web address | https://doi.org/10.17531/ein.2023.1.2 |
Analysis of Power Losses in Constrained Cycloid Drive
| DOI | 10.17559/TV-20230426000572 |
|---|---|
| Journal | TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE |
| Year | 2023 |
| Authors | Tihomir Mačkić, Nenad Marjanović, Milan Tica, Sanjin Troha, Miroslav Milutinović, and Nebojša Rašović |
| Volumen | 30 |
| Number | 4 |
| Web address | https://doi.org/10.17559/TV-20230426000572 |
Analysis of Power Losses in Constrained Cycloid Drive
| DOI | https://doi.org/10.17559/TV-20230426000572 |
|---|---|
| Journal | Tehnički vjesnik |
| Year | 2023 |
| Authors | Tihomir Mačkić, Nenad Marjanović, Milan Tica, Sanjin Troha, Miroslav Milutinović, and Nebojša Rašović |
| Volumen | 30 |
| Number | 4 |
| Page from | 1104 |
| Page to | 1111 |
| Web address | https://hrcak.srce.hr/305454 |
Reversible Planetary Gearsets Controlled by Two Brakes, for Internal Combustion Railway Vehicle Transmission Applications
| DOI | 10.12700/aph.20.1.2023.20.7 |
|---|---|
| Journal | ACTA POLYTECHNICA HUNGARICA |
| Year | 2023 |
| Authors | Milan Tica, Sanjin Troha, Željko Vrcan, and Dragan Marinković |
| Volumen | 20 |
| Number | 1 |
| Page from | 95 |
| Page to | 108 |
| Web address | https://doi.org/10.12700/aph.20.1.2023.20.7 |
Investigation of Air-cooled Condenser’s Operating Parameters in Modern Thermal Power Plant
| DOI | https://doi.org/10.2298/TSCI220806203S |
|---|---|
| Journal | THERMAL SCIENCE |
| Year | 2023 |
| Authors | Jovan Škundrić, Predrag Živković, Milan Tica, Mladen Tomić, and Cristian Barz |
| Volumen | 27 |
| Number | 3B |
| Page from | 2477 |
| Page to | 2487 |
| Web address | https://thermalscience.vinca.rs/ |
Research into the Properties of Selected Single Speed Two-Carrier Planetary Gear Trains
| DOI | https://doi.org/10.22055/JACM.2021.39143.3358 |
|---|---|
| Journal | Journal of Applied and Computational Mechanics |
| Year | 2022 |
| Authors | Željko Vrcan, J Stefanović-Marinović, Milan Tica, and Sanjin Troha |
| Volumen | 8 |
| Number | 2 |
| Web address | https://doi.org/10.22055/JACM.2021.39143.3358 |
ANALYSIS OF GEAR RATIOS OF TWO DIFFERENT TYPES OF CYCLOID DRIVE TRAIN.
| DOI | https://doi.org/10.6723/TERP.202212_6(2).0003 |
|---|---|
| Journal | STED Journal |
| Year | 2022 |
| Authors | Milan Tica, Tihomir Mačkić, Nenad Marjanović, Sanjin Troha, and Milosav Milutinović |
| Web address | https://doi.org/10.6723/TERP.202212_6(2).0003 |
ANALYSIS OF GEAR RATIOS OF TWO DIFFERENT TYPES OF CYCLOID DRIVE TRAIN
| DOI | https://doi.org/10.6723/TERP.202212_6(2).0003 |
|---|---|
| Journal | IETI Transactions on Engineering Research and Practice |
| Year | 2022 |
| Authors | Tihomir Mačkić, Milan Tica, Nenad Marjanović, Sanjin Troha, and Miroslav Milutinović |
| Volumen | 6 |
| Number | 2 |
| Page from | 18 |
| Page to | 23 |
| Web address | https://doi.org/10.6723/TERP.202212_6(2).0003 |
Analysis of Impact of Shaft Speed and External Load on the Radial Ball Bearing Lubrication Regimes
| DOI | https://doi.org/10.5937/fme2201109G |
|---|---|
| Journal | FME Transactions |
| Year | 2021 |
| Authors | R Grujičić, Milan Tica, B Stojanović, L Ivanović, Radivoje Mitrović, and R Tomović |
| Number | 50 |
| Web address | https://doi.org/10.5937/fme2201109G |
MECHANICAL PROPERTIES OF MODIFIED FLIPWING HYDROKINETIC TURBINES
| Journal | ACTA TECHNICA CORVINIENSIS |
|---|---|
| Year | 2020 |
| Authors | Tihomir Mačkić, Goran Jotić, Milan Tica, and Jovica Ilić |
| Volumen | FASCICULE 4 |
| Number | TOME XIII |
Procedure for the Selection of Rubber Compound in Rubber-Metal Springs for Vibration Isolation
| DOI | doi:10.3390/polym12081737 |
|---|---|
| Journal | Polymers |
| Year | 2020 |
| Authors | Milan Banić, Dušan Stamenković, Aleksandar Miltenović, Dragan Jovanović, and Milan Tica |
| Volumen | 1773 |
| Number | 12 |
| Web address | www.mdpi.com/journal/polymers |
Analysis of Speed Ratios of Simple Cycloid Drive With Stepped Planets
| Journal | ACTA TECHNICA CORVINIENSIS |
|---|---|
| Year | 2020 |
| Authors | Milan Tica and Tihomir Mačkić |
| Volumen | XIII |
| Number | 4 |
| Page from | 105 |
| Page to | 108 |
| Web address | https://acta.fih.upt.ro/pdf/2020-4/ACTA-2020-4-19.pdf |
Mechanical Properties of Modified Flipwing Hydrokinetic Turbines
| Journal | ACTA TECHNICA CORVINIENSIS |
|---|---|
| Year | 2020 |
| Authors | Tihomir Mačkić, Goran Jotić, Milan Tica, and Jovica Ilić |
| Volumen | XIII |
| Number | 4 |
| Page from | 45 |
| Page to | 48 |
| Web address | https://acta.fih.upt.ro/pdf/2020-4/ACTA-2020-4-08.pdf |
PREDICTION OF TEMPERATURE DISTRIBUTION IN THE WORM GEAR MESHING
| DOI | 10.22190/FUME180120016M |
|---|---|
| Journal | FACTA UNIVERSITATIS Series: Mechanical Engineering |
| Year | 2020 |
| Authors | Aleksandar Miltenović, Milan Tica, Milan Banić, and Đorđe Miltenović |
| Volumen | 18 |
| Number | 2 |
| Page from | 329 |
| Page to | 339 |
| Web address | https://doi.org/10.22190/FUME180120016M |
ANALYSIS OF SPEED RATIOS OF SIMPLE CYCLOID DRIVE WITH STEPPED PLANETS
| Journal | ACTA TECHNICA CORVINIENSIS |
|---|---|
| Year | 2019 |
| Authors | Tihomir Mačkić and Milan Tica |
| Volumen | FASCICULE 4 |
| Number | TOME XIII |
DESIGN SOLUTION AND CALCULATION OF IMPORTANT ELEMENTS OF HAND DRILL AND ANGLE GRINDER TABLE STAND
| DOI | https://doi.org/10.24867/MD.11.2019.2.59-62 |
|---|---|
| Journal | Machine Design |
| Year | 2019 |
| Authors | Milan Tica, Nikola Radulovic, Milan Banić, Aleksandar Miltenović, and Milan Rackov |
| Volumen | 11 |
| Number | 2 |
| Web address | https://doi.org/10.24867/MD.11.2019.2.59-62 |
Transmission characteristics of simple cycloid drive with stepped planets
| DOI | doi:10.1088/1757-899X/659/1/012071 |
|---|---|
| Journal | International Conference on Innovative Ideas in Science (Online) |
| Year | 2019 |
| Authors | Tihomir Mačkić, Milan Tica, and Roland Suba |
| Volumen | 659 |
| Number | 012071 |
| Web address | https://iopscience.iop.org/article/10.1088/1757-899X/659/1/012071/pdf |
Selection of optimal concept solution for preventing wrong fuel using in cars
| Journal | Machine Design |
|---|---|
| Year | 2017 |
| Authors | Milan Tica, Milan Rackov, Đorđe Miltenović, Aleksandar Miltenović, and Milan Banić |
| Volumen | 9 |
| Number | 3 |
| Page from | 117 |
| Page to | 122 |
Permissibile temperatures and thermal stability of worm gears
| Journal | ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering |
|---|---|
| Year | 2017 |
| Authors | Milan Tica, Đorđe Miltenović, Milan Banić, and Aleksandar Miltenović |
| Volumen | XV |
| Number | 3 |
| Page from | 61 |
| Page to | 66 |
Load Capacity of Worm Gears with Compact Design
| Journal | Annals of Faculty Engineering Hunedoara - International Journal of Engineering |
|---|---|
| Year | 2016 |
| Authors | Đorđe Miltenović, Milan Tica, Aleksandar Miltenović, and Milan Banić |
| Volumen | XIV |
| Number | 1 |
| Page from | 79 |
| Page to | 84 |
Construction solution and estimate of important elements assemblies of log splitter
| Journal | Machine Design |
|---|---|
| Year | 2015 |
| Authors | Milan Tica, Branislav Čolić, and Slobodan Čapljak |
| Volumen | 7 |
| Number | 3 |
| Page from | 79 |
| Page to | 84 |
Pitting of Teeth Flanks of Crossed Helical Gears Made from Sintered Steel
| Journal | TRANSACTIONS OF FAMENA |
|---|---|
| Year | 2014 |
| Authors | Đorđe Miltenović, Milan Tica, Aleksandar Miltenović, Milan Banić, S. Živković, and Žarko Mišković |
| Page from | 77 |
| Page to | 88 |
Thermal Stability of Crossed Helical Gears with Wheel made from Sintered Steel
| Journal | THERMAL SCIENCE |
|---|---|
| Year | 2012 |
| Authors | Aleksandar Miltenović, Siniša Kuzmanović, Vojislav Miltenović, Milan Tica, and Milan Rackov |
| Volumen | 16 |
| Page from | 541 |
| Page to | 553 |
| Web address | http://thermalscience.vinca.rs/2012/supplement-2/22 |
Theoretical analysis of the dominant construction-technolological parameters of the lumber scrap pelleting systems from the aspect of the optimal main function of the system
| Journal | Machine Design |
|---|---|
| Year | 2007 |
| Authors | Milan Tica and Milosav Đurđević |
| Page from | 435 |
| Page to | 438 |
The use of evolutionary principles and Altschuller matrix in determination of direction of further lumber scraps pelleting sistem development,
| Journal | Facta universitatis, Series: Physical Education and sport |
|---|---|
| Year | 2006 |
| Authors | Milan Tica |
| Volumen | 4 |
| Number | 1 |
| Page from | 93 |
| Page to | 103 |
Modeling of partial functions of lumfer scraps pelleting system and the selection of principl solutions according to Altschuller matrix
| Journal | Journal of Mechanical Engineering Design |
|---|---|
| Year | 2005 |
| Authors | Milan Tica and Milosav Đurđević |
| Volumen | 8 |
| Number | 1 |
| Page from | 24 |
| Page to | 31 |
Conference papers
CONTEMPORARY PLANETARY GEARBOXES AND THEIR CALCULATION.
| Scientific Conference | 16TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING – DEMI 2023 |
|---|---|
| Year | 2023 |
| Authors | Željko Vrcan, Milan Tica, Sanjin Troha, and Miroslav Milutinović |
ANALYSIS OF GEAR RATIOS OF TWO DIFFERENT TYPES OF CYCLOID DRIVE TRAIN
| Scientific Conference | 6th International scientific conference COMETa-2022 |
|---|---|
| Year | 2022 |
| Authors | Milan Tica, Tihomir Mačkić, Nenad Marjanović, Sanjin Troha, and Miroslav Milutinović |
| Page from | 415 |
| Page to | 420 |
ANALYSIS OF GEAR RATIOS OF TWO DIFFERENT TYPES OF CYCLOID DRIVE TRAIN
| Scientific Conference | 6th International Scientific Conference ”Conference on Mechanical Engineering Technologies and Applications” COMETa2022, |
|---|---|
| Year | 2022 |
| Authors | Milan Tica, Tihomir Mačkić, Nenad Marjanović, Sanjin Troha, and Miroslav Milutinović |
DIGITAL TRANSFORMATIONS IN MECHANICAL ENGINEERING, TRENDS IN EDUCATION IN THE FIELD OF MACHINE ELEMENTS AND SYSTEMS
| Scientific Conference | 10th International Scientific Conference IRMES 2022 |
|---|---|
| Year | 2022 |
| Authors | Milan Tica and Tihomir Mačkić |
DIGITAL TRANSFORMATIONS IN MECHANICAL ENGINEERING, TRENDS IN EDUCATION IN THE FIELD OF MACHINE ELEMENTS AND SYSTEMS
| Scientific Conference | 10th International Scientific Conference IRMES 2022 |
|---|---|
| Year | 2022 |
| Authors | Milan Tica and Tihomir Mačkić |
| Page from | 41 |
| Page to | 52 |
POSSIBILITIES FOR THE APPLICATION OF REVERSIBLE PLANETARY TWO-SPEED GEARBOXES.
| Scientific Conference | 6th International Scientific Conference ”Conference on Mechanical Engineering Technologies and Applications” COMETa2022, |
|---|---|
| Year | 2022 |
| Authors | Sanjin Troha, Milan Tica, Željko Vrcan, and Miroslav Milutinović |
IDENTIFICATION DESIGN PARAMETERS OR LOAD CAPACITY IN MANUAL GEARBOX FOR DIFFERENCE WORKING CONDITIONS.
| Scientific Conference | . 6th International scientific conference COMETa-2022 |
|---|---|
| Year | 2022 |
| Authors | Miroslav Milutinović, Sanjin Troha, M Isametova, Spasoje Trifković, Milan Tica, and K Singkh |
BAUKASTEN PLANETARY TRANSMISSION CONSTRUCTION SYSTEM
| Scientific Conference | 6th International Scientific Conference ”Conference on Mechanical Engineering Technologies and Applications” COMETa2022, |
|---|---|
| Year | 2022 |
| Authors | Vojislav Miltenović, Biljana Marković, and Milan Tica |
Influence of Cycloid Disk Profile Correction on Contact Force
| Scientific Conference | 15TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING – DEMI 2021 |
|---|---|
| Year | 2021 |
| Authors | Tihomir Mačkić, Nenad Marjanović, Goran Jotić, Milan Tica, and Željko Đurić |
| Page from | 282 |
| Page to | 285 |
Influence of Cycloid Disk Profile Correction on Contact Force
| Scientific Conference | 15TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING – DEMI 2021 |
|---|---|
| Year | 2021 |
| Authors | Tihomir Mačkić, Nenad Marjanović, Goran Jotić, Milan Tica, and Željko Đurić |
MECHANICAL PROPERTIES OF MODIFIED FLIPWING HYDROKINETIC TURBINES
| Scientific Conference | 14th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI, Banja Luka, 2019 |
|---|---|
| Year | 2019 |
| Authors | Tihomir Mačkić, Goran Jotić, Milan Tica, and Jovica Ilić |
| Page from | 385 |
| Page to | 390 |
Transmission characteristics of simple cycloid drive with stepped planets
| Scientific Conference | 9th International Scientific Conference - IRMES 2019 |
|---|---|
| DOI | 10.1088/1757-899X/659/1/012071 |
| Year | 2019 |
| Authors | Tihomir Mačkić, Milan Tica, and Roland Suba |
| Web address | https://iopscience.iop.org/article/10.1088/1757-899X/659/1/012071 |
MECHANICAL PROPERTIES OF MODIFIED FLIPWING HYDROKINETIC TURBINES,
| Scientific Conference | 14 TH INTERNATIONAL CONFERENCE ON ACCOMPLISHMENTS IN MECHANICAL AND INDUSTRIAL ENGINEERING – DEMI 2019 |
|---|---|
| Year | 2019 |
| Authors | Tihomir Mačkić, Goran Jotić, Milan Tica, and Jovica Ilić |
TRANSMISSION CHARACTERISTICS OF SIMPLE CYCLOID DRIVE WITH STEPPED PLANETS
| Scientific Conference | 9th International Scientific Conference IRMES 2019, |
|---|---|
| Year | 2019 |
| Authors | Tihomir Mačkić, Milan Tica, and Roland Suba |
PRODUCT DESIGN CASE STUDY: CONCEPTUAL SOLUTION OF HAND DRILL/ANGLE GRINDER TABLE STAND
| Scientific Conference | 4th International scientific conference COMETa-2018 |
|---|---|
| Year | 2018 |
| Authors | Milan Tica, Nikola Radulovic, and Tihomir Mačkić |
PRODUCT DESIGN CASE STUDY: CONSEPTUAL SOLUTION OF HAND DRILL/ANGLE GRINGER TABLE STAND
| Scientific Conference | Conference on Mechanical Engineering Technologies and Applications” COMETa 2018 |
|---|---|
| Year | 2018 |
| Authors | Milan Tica, Nikola Radulović, and Tihomir Mačkić |
| Page from | 351 |
| Page to | 358 |
Concept solution of the safety system for avoiding wrong fuel using in cars and prevention of damage
| Scientific Conference | 8th International Scinetific Conference IRMES 2017, Supported by: IFToMM International Federation for the Promotion of Mechanism and Machine Science |
|---|---|
| Year | 2017 |
| Authors | Milan Tica, Milan Rackov, Đorđe Miltenović, Aleksandar Miltenović, and Milan Banić |
| Page from | 175 |
| Page to | 180 |
Vještačenje vozila – prikaz slučaja zapaljenja vozila
| Scientific Conference | Stručni skup Tehnički pregled vozila Republike Srpske |
|---|---|
| Year | 2017 |
| Authors | Milan Tica |
| Page from | 79 |
| Page to | 89 |
Reducing of Scuffing Phenomenon at HCR Spur Gearing
| Scientific Conference | 5. International Conference on Advanced Manufacturing Engineering and Technologies - NEWTECH, |
|---|---|
| DOI | 10.1007/978-3-319-56430-2_10 |
| Publication | Proceedingss 5. International Conference on Advanced Manufacturing Engineering and Technologies - NEWTECH, Beograd: Springer, |
| Year | 2017 |
| Authors | Milan Rackov, Maja Čavić, Marko Penčić, Ivan Knežević, Miroslav Vereš, and Milan Tica |
| Page from | 141 |
| Page to | 155 |
Analysis of load carryng capacity of worm gears from the aspect of engineering practice
| Scientific Conference | 13th International conference on accomplishments in mechanical and industrial engineering – DEMI 2017 |
|---|---|
| Year | 2017 |
| Authors | Đorđe Miltenović, Milan Tica, Aleksandar Miltenović, and Milan Banić |
| Page from | 611 |
| Page to | 617 |
Power Losses and Efficiency of Worm Gears in Extreme Operating Conditions
| Scientific Conference | 3rd International scientific conference COMETa-2016 „Conference on Mechanical Engineering Technologies and Applications“ |
|---|---|
| Year | 2016 |
| Authors | Đorđe Miltenović, Milan Banić, Aleksandar Miltenović, and Milan Tica |
| Page from | 169 |
| Page to | 176 |
Car safety – ignition risk due to wrong fuel using
| Scientific Conference | XL Naučno – stručni skup ODRŽAVANJE MAŠINA I OPREME OMO 2015 |
|---|---|
| Year | 2015 |
| Authors | Milan Tica, Milan Rackov, Đorđe Miltenović, Aleksandar Miltenović, and Milan Banić |
| Page from | 244 |
| Page to | 250 |
Science – generator of industrial and overall development of Serbia and Republic of Srpska
| Scientific Conference | 12TH International conference on accomplishments in electrical and mechanical engineering and information technology – DEMI 2015 |
|---|---|
| Year | 2015 |
| Authors | Radivoje Mitrović, Milan Tica, Ivana Atanasovska, and Predrag Popović |
| Page from | 41 |
| Page to | 52 |
Product Design Case Stady: Conceptual Solution Log Splitter
| Scientific Conference | 3. International conference mechanical engineering in XXI century - MASING |
|---|---|
| Year | 2015 |
| Authors | Milan Tica, Slobodan Čapljak, Aleksandar Miltenović, and Milan Banić |
| Page from | 125 |
| Page to | 130 |
Possibilities of Increasing Efficiency of Mechanical Transmissions
| Scientific Conference | 8. The Eighth International Symposium - KOD 2014 - Machine and Industrial Design in Mechanical Engineering |
|---|---|
| Year | 2014 |
| Authors | Siniša Kuzmanović, Milan Rackov, Ivan Knežević, Klara Rafa, and Milan Tica |
Analysis of Existing Calculation Methods for Group Bolted Joints Loaded by a Moment Perpendicular to the Joint Plane
| Scientific Conference | 2. International conference mechanical engineering in XXI century - MASING |
|---|---|
| Year | 2013 |
| Authors | Siniša Kuzmanović, Milan Rackov, Klara Rafa, and Milan Tica |
| Page from | 205 |
| Page to | 208 |
Construction Solution of Press for Biomass Pelleting
| Scientific Conference | 48th INTERNATIONAL CONFERENCE OF MACHINE ELEMENTS AND MECHANISMS DEPARTMENTS 2007 |
|---|---|
| Year | 2007 |
| Authors | Vojislav Miltenović, M. Velimirović, Milan Tica, and Milan Banić |
| Page from | 199 |
| Page to | 206 |
DESIGNED SOLUTION FOR LUMBER SCRAP PALLETING SYSTEMS AND IDENTIFICATION KEYS CONSTRUCTION-TECHNOLOGICAL PARAMETARS FOR OPTIMAL WORK OF THE SYSTEM
| Scientific Conference | Istraživanje i razvoj mašinskih elemenata i sistema - IRMES 2002 2006 |
|---|---|
| Year | 2006 |
| Authors | Milan Tica and Milosav Đurđević |
| Page from | 101 |
| Page to | 106 |
Review of Previous Wooden Waste Problem Solutions and Selection of Optimal Tehnology for Wooden Waste Procesing
| Scientific Conference | 18. Simpozijum termičara Srbije i Crne Gore |
|---|---|
| Year | 2005 |
| Authors | Milan Tica, Vojislav Miltenović, and Milosav Đurđević |
Raspodjela napona u podnožju zubaca za različite oblike debljine vijenca zupčanika
| Scientific Conference | Istraživanje i razvoj mašinskih elemenata i sistema - IRMES 2004 |
|---|---|
| Year | 2004 |
| Authors | Milosav Đurđević and Milan Tica |
| Page from | 595 |
| Page to | 600 |
3D modeliranje cilindričnih zupčanika sa pravim zupcima integracijom softvera „CATIA“ i „EXCELL“
| Scientific Conference | Simpozijum o mehaničkim prenosnicima |
|---|---|
| Year | 2003 |
| Authors | Mićo Stanojević, Milosav Đurđević, and Milan Tica |
| Page from | 78 |
| Page to | 81 |
Uticaj oblika tijela velikih zupčanika na pouzdanost zupčastih parova
| Scientific Conference | Istraživanje i razvoj mašinskih elemenata i sistema - IRMES 2002 |
|---|---|
| Year | 2002 |
| Authors | Milosav Đurđević and Milan Tica |
| Page from | 631 |
| Page to | 636 |
Optimalne dimenzije dvostepenih konusno-cilindričnih zupčastih reduktora
| Scientific Conference | Simpozijum o mehaničkim prenosnicima |
|---|---|
| Year | 2001 |
| Authors | Milosav Đurđević, Milan Tica, and Mićo Stanojević |
| Page from | 111 |
| Page to | 114 |
Raspodjela opterećenja po dodirnim linijama bokova zubaca za granična odstupanja mjera i oblika zupčanika
| Scientific Conference | Istraživanje i razvoj mašinskih elemenata i sistema - IRMES 2000 |
|---|---|
| Year | 2000 |
| Authors | Milosav Đurđević and Milan Tica |
| Page from | 223 |
| Page to | 228 |
Books and bibiliographies
KONSTRUKCIONI ELEMENTI U MAŠINOGRADNJI 2
| Publisher | Univerzitet u Istočnom Sarajevu – Mašinski fakultet, Istočno Sarajevo |
|---|---|
| ISBN | 978-99976-719-5-0 |
| Year | 2020 |
| Authors | Vojislav Miltenović, Milan Tica, and Biljana Marković |
| Type | osnovni udžbenik |
| Page count | 600 |
KONSTRUKCIONI ELEMENTI U MAŠINOGRADNJI 1
| Publisher | Univerzitet u Istočnom Sarajevu – Mašinski fakultet, Istočno Sarajevo |
|---|---|
| ISBN | 978-99976-719-3-6 |
| Year | 2018 |
| Authors | Vojislav Miltenović, Biljana Marković, and Milan Tica |
| Type | osnovni udžbenik |
| Page count | 588 |
OSNOVE TEHNIČKIH PROPISA
| Publisher | Univerzitet u Beogradu - Mašinski fakultet |
|---|---|
| ISBN | 978-86-7083-861-1 |
| Year | 2015 |
| Authors | Radivoje Mitrović, Žarko Mišković, Zoran Stamenić, Biljana Marković, and Milan Tica |
| Type | osnovni udžbenik |
INOVACIJE I PATENTI - teorija rješavanja pronalazačkih zadataka
| Publisher | Univerzitet u Banjoj Luci - Mašinski fakultet |
|---|---|
| ISBN | 978-999-38-39-56-9 |
| Year | 2015 |
| Authors | Milan Tica, Radivoje Mitrović, Aleksandar Miltenović, Žarko Mišković, and Milan Banić |
| Type | pomoćni udžbenik |
Projects
International
Podrška uspostavljanju i razvoju preduzeća kroz uspostavljanje novog mehanizma podrške i osnivanje i razvoj firmi za lica mlađa od 30 godina
Podrška uspostavljanju i razvoju preduzeća, kroz mehanizam podrške , pripremu biznis planova, obezbjeđivanje finasijske podrške i stručnog mentoringa za pokretanje vlastitog biznisa za lica mlađa od 30 godina u oblasti informacionih tehnologija
| Project Number | 1255029 |
|---|---|
| Status | Archived |
| Type of project | Međunarodni stručni (profesionalni) |
| Organizational unit | Faculty of Electrical Engineering |
| Head | Branko Blanuša |
| Participants |
Vladimir Risojevic Igor Dujlovic Zeljko Ivanovic Milan Tica Drazen Brdjanin Goran Banjac |
| Business Partner | EVROPSKA UNIJA BIH |
| Beginning of realization | 2021-02-01 |
| End of the project | 2022-06-01 |
| Project value | 19558.0 BAM |
