Navigation

prof. dr Đorđe Čiča
redovni profesor

Nastavnik - II-4
Mašinski fakultet
051/433-068
Katedre
  • Mašinski fakultet - Katedra za proizvodne i računarom podržane tehnologije
Uža naučna/umjetnička oblast Zvanje Datum izbora u zvanje
Proizvodno mašinstvo redovni profesor April 29, 2021

Predmeti

Mašinski fakultet

Akademske studije drugog ciklusa Akademske studije prvog ciklusa

Šumarski fakultet

Akademske studije prvog ciklusa

Prirodno-matematički fakultet

Akademske studije prvog ciklusa

Bibliografija

Radovi u časopisima

    Optimization of superalloy Inconel 718 micro‑milling process by combined Taguchi and multi‑criteria decision making method

    DOI 10.1007/s40430-024-04996-7
    Časopis JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING
    Godina 2024
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar
    Volumen 46
    Strana od 1
    Strana do 14
    Veb adresa https://link.springer.com/article/10.1007/s40430-024-04996-7

    Predictive modeling of turning operations under different cooling/lubricating conditions for sustainable manufacturing with machine learning techniques

    Časopis Applied Computing and Informatics
    Godina 2024
    Autori Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Davorin Kramar
    Volumen 20
    Broj 1-2
    Strana od 162
    Strana do 180

    Machinability investigation and sustainability analysis of high-pressure coolant assisted turning of the nickel-based superalloy Inconel 718

    DOI https://doi.org/10.1177/0954405422109293
    Časopis PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS. PART B, JOURNAL OF ENGINEERING MANUFACTURE
    Godina 2023
    Autori Đorđe Čiča and Davorin Kramar
    Volumen 237
    Broj 1-2
    Strana od 43
    Strana do 54
    Veb adresa https://journals.sagepub.com/doi/full/10.1177/09544054221092939

    Analysis and optimization of the process parameters on surface roughness in ball burnishing of AISI O2 hardened steel

    DOI https://doi.org/10.1007/s00170-023-11910-3
    Časopis INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    Godina 2023
    Autori Đorđe Čiča and Davorin Kramar
    Volumen 128
    Strana od 345
    Strana do 356
    Veb adresa https://link.springer.com/article/10.1007/s00170-023-11910-3

    Multi-Objective Optimization of Sustainable Steel AISI 1045 Turning Energy Parameters under MQL Condition

    DOI https://doi.org/10.24874/ti.1301.05.22.07
    Časopis TRIBOLOGY IN INDUSTRY
    Godina 2022
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar
    Volumen 44
    Broj 3
    Strana od 498
    Strana do 507
    Veb adresa https://www.tribology.rs/journals/2022/2022-3/2022-3-11.html

    Experimental analysis and optimization of thin-walled tubular parts milling

    DOI http://doi.org/10.24867/JPE-2022-02-006
    Časopis Journal of production engineering
    Godina 2022
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar
    Volumen 25
    Broj 4
    Strana od 6
    Strana do 12
    Veb adresa http://www.jpe.ftn.uns.ac.rs/papers/2022/no2/2-Sredanovic_JPE_25_No2.pdf

    Optimization and Prediction of Specific Energy Consumption in Ball-End Milling of Ti-6Al-4V Alloy Under MQL and Cryogenic Cooling/Lubrication Conditions

    DOI https://doi.org/10.1007/s40684-021-00413-9
    Časopis INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY
    Godina 2022
    Autori Saša Tešić, Đorđe Čiča, Stevo Borojević, Branislav Sredanović, Milan Zeljković, Davorin Kramar, and Franci Pusavec
    Volumen 9
    Broj November 2022
    Strana od 1427
    Strana do 1437

    Experimental investigation of tool deflection in micro-milling of fine-grained graphite

    Časopis INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    Godina 2022
    Autori Đorđe Čiča, Branislav Sredanović, and Goran Miljušković
    Volumen 123
    Strana od 161
    Strana do 168

    Capability of micro-milling in machining of difficult-to-cut materials

    Časopis International Scentific Journal Industry 4.0
    Godina 2021
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar
    Volumen 6
    Broj 6
    Strana od 218
    Strana do 221
    Veb adresa https://stumejournals.com/journals/i4/2021/6/218

    Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece

    Časopis ACTA TECHNICA CORVINIENSIS
    Godina 2021
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar
    Volumen 14
    Broj 4
    Strana od 29
    Strana do 33
    Veb adresa http://acta.fih.upt.ro/ACTA-2021-4.html

    Modeling and optimization of finish diamond turning of spherical surfaces based on response surface methodology and cuckoo search algorithm

    Časopis Advances in Production Engineering & Management
    Godina 2021
    Autori Davorin Kramar and Đorđe Čiča
    Volumen 16
    Broj 3
    Strana od 326
    Strana do 334

    Investigation, modeling, and optimization of surface roughness in micro-milling of graphite electrodes

    Časopis INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    Godina 2021
    Autori Goran Miljušković and Đorđe Čiča
    Volumen 117
    Strana od 579
    Strana do 590

    Multi-objective Optimization of Hard Milling Using Taguchi Based Grey Relational Analysis

    Časopis TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE
    Godina 2020
    Autori Đorđe Čiča, Halil Caliskan, Peter Panjan, and Davorin Kramar
    Volumen 27
    Broj 2
    Strana od 513
    Strana do 519

    Dynamical Contact Parameter Identification of Spindle-Holder-Tool Assemblies Using Soft Computing Techniques

    Časopis Facta Universitatis, Series: Mechanical Engineering
    Godina 2020
    Autori Đorđe Čiča, Milan Zeljković, and Saša Tešić
    Volumen 18
    Broj 4
    Strana od 565
    Strana do 577

    Optimisation of turning parameters for minimising specific cutting energy with use of different cooling/lubricating techniques

    Časopis International Journal of Machining and Machinability of Materials
    Godina 2020
    Autori Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Davorin Kramar
    Volumen 22
    Broj 2
    Strana od 153
    Strana do 164

    Multiple performance characteristics optimization in end milling of thin-walled parts using desirability function

    Časopis TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING
    Godina 2020
    Autori Đorđe Čiča, Stevo Borojević, Goran Jotić, Branislav Sredanović, and Saša Tešić
    Volumen 44
    Broj 1
    Strana od 84
    Strana do 94

    Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel

    Časopis International Journal "Machines, Technologies, Materials"
    Godina 2019
    Autori Branislav Sredanović, Đorđe Čiča, Saša Tešić, and Davorin Kramar
    Volumen 13
    Broj 11
    Strana od 491
    Strana do 494

    Multi-objective optimization of high-pressure jet-assisted turning of Inconel 718

    Časopis INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
    Godina 2019
    Autori Đorđe Čiča and Davorin Kramar
    Volumen 105
    Broj 11
    Strana od 4731
    Strana do 4745

    Optimizacija i ispitivanje uticaja parametara rezanja na hrapavost obrađene površine pri glodanju biokompatibilne legure - Ti6Al4V

    Časopis TEHNIKA - MAŠINSTVO
    Godina 2019
    Autori Saša Tešić, Milan Zeljković, and Đorđe Čiča
    Volumen 68
    Broj 5
    Strana od 677
    Strana do 682

    Električni servo sistemi upravljanja

    Časopis Stručna institucija za tehničke preglede vozila Republike Srpske
    Godina 2018
    Autori Aleksandar Milašinović, Đorđe Čiča, and Željko Đurić
    Broj UDK 629.3.05/.06
    Strana od 3
    Strana do 13

    Tok tehničkog pregleda u evropskoj uniji po direktivi 2014/45/EU

    Časopis Stručna institucija za tehničke preglede vozila Republike Srpske
    Godina 2018
    Autori Aleksandar Milašinović, Đorđe Čiča, and Željko Đurić
    Broj UDK 629.3.083(4-
    Strana od 13
    Strana do 43

    Intelligent Process Modeling and Optimization of Porosity Formation in High-Pressure Die Casting

    Časopis INTERNATIONAL JOURNAL OF METALCASTING
    Godina 2018
    Autori Đorđe Čiča and Davorin Kramar
    Volumen 12
    Broj 4
    Strana od 814
    Strana do 824

    A mathematical model for evaluation of intelligence products value

    Časopis Journal of Information and Optimization Sciences
    Godina 2018
    Autori Dragan Korac and Đorđe Čiča
    Volumen 39
    Strana od 903
    Strana do 926

    Prediction of natural frequencies of the tool controlled mode using soft computing techniques

    Časopis International Scentific Journal Industry 4.0
    Godina 2017
    Autori Đorđe Čiča, Milan Zeljkovic, Branislav Sredanović, and Stevo Borojević
    Volumen 1
    Broj 1
    Strana od 11
    Strana do 14

    Optimization of machining parameters with minimum surface roughness for three-axis milling of sculptured parts

    Časopis Journal of production engineering
    Godina 2017
    Autori Đorđe Čiča, Zeljkovic Milan, Branislav Sredanović, and Sasa Tesic
    Volumen 20
    Broj 2
    Strana od 34
    Strana do 38

    Predictive model and optimization of processing parameters for plastic injection moulding

    Časopis MATERIALI IN TEHNOLOGIJE
    Godina 2017
    Autori Davorin Kramar and Djordje Cica
    Volumen 51
    Broj 4
    Strana od 597
    Strana do 602

    Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach

    Časopis International Journal "Machines, Technologies, Materials"
    Godina 2017
    Autori Đorđe Čiča, Branislav Sredanović, and Davorin Kramar
    Volumen 4
    Strana od 186
    Strana do 190

    Design of fuzzy expert system for predicting of surface roughness in high-pressure jet assisted turning using bioinspired algorithms

    DOI 10.1017/S0890060415000189
    Časopis AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFAC
    Godina 2016
    Autori Davorin Kramar, Đorđe Čiča, Branislav Sredanović, and Janez Kopac
    Volumen 30
    Broj 1
    Strana od 96
    Strana do 106

    Dynamic analysis of spindle-holder-tool assembly

    Časopis Machine Design
    Godina 2016
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević
    Volumen 8
    Broj 2
    Strana od 53
    Strana do 56

    Identification of dynamical contact parameters for spindle-holder-tool assembly

    Časopis Journal of production engineering
    Godina 2016
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević
    Volumen 19
    Broj 1
    Strana od 57
    Strana do 60

    Virtual modeling of assembly and working elements for horizontal hydraulic press

    Časopis ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering
    Godina 2015
    Autori Zdravko Božičković, Bogdan Marič, Dragoslav Dobraš, Gordana Globočki-Lakić, and Đorđe Čiča
    Volumen XIII
    Broj 3
    Strana od 165
    Strana do 168
    Veb adresa http://annals.fih.upt.ro/ANNALS-2015-3.html

    Comparative Study of ANN and ANFIS Prediction Models For Turning Process in Different Cooling and Lubricating Conditions

    DOI 10.4271/2015-01-9082
    Časopis International Journal of Materials and Manufacturing
    Godina 2015
    Autori Branislav Sredanović and Đorđe Čiča
    Volumen 8
    Broj 2
    Strana od 586
    Strana do 591

    Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study

    Časopis INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
    Godina 2015
    Autori Đorđe Čiča, Branislav Sredanović, and Davorin Kramar
    Volumen 50
    Broj 1
    Strana od 49
    Strana do 64

    Analysis of effectiveness on production system for production of the tools for hydraulic press brakers

    Časopis ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering
    Godina 2014
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović
    Volumen 12
    Broj 2
    Strana od 127
    Strana do 132

    Prediction of cutting zone temperature in high-pressure assisted turning using GA and PSO based ANN

    Časopis Journal of production engineering
    Godina 2014
    Autori Đorđe Čiča, Branislav Sredanović, and Davorin Kramar
    Volumen 17
    Broj 1
    Strana od 43
    Strana do 46

    Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach

    DOI 10.1155/5263
    Časopis Advances in Mechanical Engineering
    Godina 2013
    Autori Đorđe Čiča, Branislav Sredanović, Gordana Globočki-Lakić, and Davorin Kramar
    Volumen 2013
    Strana od 1
    Strana do 8
    Veb adresa http://dx.doi.org/10.1155/2013/798597

    Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining

    Časopis STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING
    Godina 2013
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, and Davorin Kramar
    Volumen 59
    Broj 12
    Strana od 748
    Strana do 754
    Veb adresa http://www.sv-jme.eu/home/

    Modelling of dynamical behavior of a spindle-holder-tool assembly

    Časopis STROJARSTVO
    Godina 2012
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, and Branislav Sredanović
    Volumen 54
    Broj 2
    Strana od 135
    Strana do 144

    Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks

    Časopis Journal of production engineering
    Godina 2012
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović, and Stevo Borojević
    Volumen 15
    Broj 2
    Strana od 37
    Strana do 40

    Development of mathematical model of universal material machinability

    Časopis JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION
    Godina 2011
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Bogdan Nedić, Đorđe Čiča, and Dobrivoje Ćatić
    Volumen 17
    Broj 4
    Strana od 501
    Strana do 511

    Development of Application for Analysis of Machinability Index

    Časopis TRIBOLOGY IN INDUSTRY
    Godina 2009
    Autori Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović
    Volumen 31
    Broj 1&2
    Strana od 57
    Strana do 60

    Rapid investigation of materials machineability in models condition using tribometer

    Časopis TRIBOLOGY IN INDUSTRY
    Godina 2006
    Autori Gordana Globočki-Lakić, Bogdan Nedić, Valentina Golubović-Bugarski, and Đorđe Čiča
    Volumen 28
    Broj 3&4
    Strana od 9
    Strana do 15

Radovi sa skupova

    Capability of micro-milling in machining of difficult-to-cut materials

    Naučni skup VI International Scientific Conference Industry 4.0
    Publikacija Proceedings of VI International Scientific Conference Industry 4.0
    Godina 2023
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar
    Strana od 220
    Strana do 223

    Energy consumption analysis and parameter optimization in high-feed milling operation

    Naučni skup 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023
    Publikacija Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023
    Godina 2023
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, Dajana Jokić, and Davorin Kramar
    Strana od 41
    Strana do 46

    Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja

    Naučni skup 43. JUPITER konferencija
    Publikacija Zbornik radova sa 43. JUPITER konferencije
    Godina 2022
    Autori Stevo Borojević, Đorđe Čiča, Branislav Sredanović, Saša Tešić, and Milan Ćulum
    Strana od 11
    Strana do 16

    Eksperimentalna analiza i optimizacija tvrdoće obrađene površine u kriogenim i MQL uslovima glodanja loptastim glodalom legure titanijuma Ti-6Al-4V

    Naučni skup 43. JUPITER konferencija
    Godina 2022
    Autori Saša Tešić, Milan Zeljković, Slobodan Tabaković, Đorđe Čiča, Stevo Borojević, and Branislav Sredanović
    Strana od 3.73
    Strana do 3.78

    Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V

    Naučni skup 38th International Conference on Production Engineering Serbia ICPE 2021
    Publikacija Proceedings of 38th International Conference on Production Engineering Serbia ICPE 2021
    Godina 2021
    Autori Saša Tešić, Milan Zeljković, Đorđe Čiča, Stevo Borojević, and Branislav Sredanović
    Strana od 96
    Strana do 101

    Experimental analysis and optimization of thin-walled tubular parts milling

    Naučni skup 14th International Scientific Conference MMA 2018
    Publikacija Proceeding of 14th International Scientific Conference MMA 2018
    Godina 2021
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar
    Strana od 31
    Strana do 36

    Energy consumption model of the face milling

    Naučni skup 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021
    Publikacija Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021
    Godina 2021
    Autori Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović, and Goran Jotić
    Strana od 89
    Strana do 93

    Application of analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece

    Naučni skup DEMI 2021 15th International Conference on Accomplishments in Mechanical and Industrial Engineering
    Publikacija 15th International Conference on Accomplishments in Mechanical and Industrial Engineering
    Godina 2021
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar
    Strana od 71
    Strana do 77
    Veb adresa https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf

    Energy consumption model of the face milling

    Naučni skup 15th International Conference on Accomplishments in Mechanical and Industrial Engineering, DEMI 2021, Banja Luka
    Godina 2021
    Autori Saša Tešić, Đorđe Čiča, Milan Zeljković, Stevo Borojević, Branislav Sredanović, and Goran Jotić
    Strana od 89
    Strana do 93
    Veb adresa https://demi.mf.unibl.org/wp-content/uploads/2021/06/ZBORNIK-RADOVA-DEMI-2021-PROCEEDINGS.pdf

    Application of Taguchi method for identifying optimum specific energy consumption in CNC face milling

    Naučni skup 19th International Symposium INFOTEH-JAHORINA
    Godina 2020
    Autori Saša Tešić, Đorđe Čiča, Branislav Sredanović, and Bojan Knežević
    Strana od 1
    Strana do 4

    Automatizacija projektovanja proizvoda primjenom CAD sistema nove generacije

    Naučni skup Jupiter konferencija
    Godina 2020
    Autori Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Saša Tešić
    Strana od 2.20
    Strana do 2.25

    Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel

    Naučni skup IV International Scientific Conference Industry 4.0
    Publikacija proceedings of IV International Scientific Conference Industry 4.0
    Godina 2019
    Autori Branislav Sredanović, Đorđe Čiča, Stevo Borojević, Saša Tešić, and Davorin Kramar
    Strana od 283
    Strana do 286

    Quality inspection of free-form surface parts

    Naučni skup 14th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI
    Publikacija Proceedings of International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI
    Godina 2019
    Autori Goran Jotić, Saša Tešić, Đorđe Čiča, and Simo Jokanović

    Investigation of the effects of the cutter path strategies on machining time and surface roughness in three-axis sculptured surface machining

    Naučni skup 14th International Conference on Accomplishments in Mechanical and Industrial Engineering
    Godina 2019
    Autori Đorđe Čiča, Sasa Tesic, Branislav Sredanović, and Stevo Borojević
    Strana od 131
    Strana do 138

    Provjera ispravnosti kočnog sistema kod putničkih vozila

    Naučni skup Stručni skup tehnički pregledi vozila Republike Srpske 2018
    Publikacija Zbornik radova
    Godina 2018
    Autori Aleksandar Milašinović, Đorđe Čiča, and Željko Đurić
    Strana od 19
    Strana do 35

    Modeling and simulation of production process for the tools of the press brake

    Naučni skup 13th International scientific conference MMA 2018 - Flexible technologies
    Godina 2018
    Autori Stevo Borojević, Vid Jovišević, Đorđe Čiča, and Branislav Sredanović
    Strana od 179
    Strana do 182

    Artificial neural networks model for the prediction of surface roughness in machining thin walled parts

    Naučni skup 13th International scientific conference MMA 2018 - Flexible technologies
    Godina 2018
    Autori Đorđe Čiča, Stevo Borojević, Branislav Sredanović, and Sasa Tesic
    Strana od 75
    Strana do 78

    Savremeni trendovi razvoja dizel motora

    Naučni skup Stručni skup tehnički pregledi vozila Republike Srpske 2017
    Publikacija Zbornik radova
    Godina 2017
    Autori Aleksandar Milašinović, Đorđe Čiča, and Željko Đurić
    Strana od 91
    Strana do 119

    An Integration of Bio-inspired Algorithms and Fuzzy Logic for Tool Wear Estimation in Hard Turning

    Naučni skup 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017
    Godina 2017
    Autori Đorđe Čiča, Branislav Sredanović, Stevo Borojević, and Davorin Kramar
    Strana od 1
    Strana do 12

    Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach

    Naučni skup INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY
    Godina 2017
    Autori Đorđe Čiča, Branislav Sredanović, and Davorin Kramar
    Strana od 75
    Strana do 79

    Prediction of natural frequencies of the tool controlled mode using soft computing techniques

    Naučni skup International Scientific Conference Industry 4.0
    Godina 2016
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević
    Strana od 22
    Strana do 25

    A predictive model of cutting forces in MQL turning usig genetic algorithm

    Naučni skup 3rd International scientific conference COMETa
    Godina 2016
    Autori Đorđe Čiča, Branislav Sredanović, and Davorin Kramar
    Strana od 237
    Strana do 242

    Identification of dynamical contact parameters for spindle-holder-tool assembly

    Naučni skup International Scientific Conference MMA 2015 - Flexible Technologies
    Godina 2015
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović, and Stevo Borojević
    Strana od 67
    Strana do 71

    Virtual modeling of assembly and working elements for horizontal hydraulic press

    Naučni skup II International Scientific Conference "COMETA 2014"
    DOI ISBN 978-99976-323-2-3
    Publikacija Zbornik radova COMETa2014, ISBN 978-99976-623-1-6
    Godina 2014
    Autori Zdravko Božičković, Bogdan Marić, Dragoslav Dobraš, Gordana Globočki-Lakić, and Đorđe Čiča
    Strana od 539
    Strana do 546

    Analysis of effectiveness on production system for production of the tools for hydraulic press brakers

    Naučni skup 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
    Publikacija Proceedings of 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology, ISBN 978-99938-39-46-0
    Godina 2013
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović
    Strana od 283
    Strana do 291

    A novel method for material machinability evaluation

    Naučni skup International Conference of Sustainable Life in manufacturing - SLIM 2013
    Publikacija Proceedings of 4th International Conference odf Sustainable Life in maufacturing SLIM 2013, ISBN 978-961-6536-67-7
    Godina 2013
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, and Stevo Borojević
    Strana od 110
    Strana do 116

    Tolerance transfer from CAD to CAM systems

    Naučni skup International Conference on Production Engineering
    Godina 2013
    Autori Đorđe Čiča, Simo Jokanović, Slaviša Todorović, and Stevo Borojević
    Strana od 289
    Strana do 293

    Application of CAD/CAM systems for machining parts of aluminium profiles

    Naučni skup International scientific conference MMA 2012– Advanced Production Technologies
    Publikacija 11th International scientific conference MMA – Advanced Production Technologies, ISBN 978-86-7892-419-4
    Godina 2012
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Đorđe Čiča, and Aleksandar Milutinović
    Strana od 227
    Strana do 231

    Identification of contact parameters of spindle‐holder‐tool assembly using artificial neural networks

    Naučni skup International scientific conference MMA 2012 – Advanced Production Technologies
    Publikacija Proc. of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, ISBN 978-9940-527-24-2
    Godina 2012
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović, and Stevo Borojević
    Strana od 57
    Strana do 61

    Analiza obradivosti materijala pomoću aplikativnog računarskog programa

    Naučni skup 10. međunarodna konferencija Održavanje i proizvodni inženjering KODIP 2012
    Publikacija Zbornik radova, KODIP 2012, ISBN978-9940-527-24-2
    Godina 2012
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Stevo Borojević, Đorđe Čiča, and Vid Jovišević
    Strana od 81
    Strana do 88

    Novi pristup definisanja univerzalne obradivosti pri obradi rezanjem

    Naučni skup Jupiter konferencija
    Publikacija Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN978-86-7083-724-9
    Godina 2011
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Bogdan Nedić, and Đorđe Čiča
    Strana od 109
    Strana do 114

    Application of artificial intelligence in modeling of metal cutting process

    Naučni skup 10th International Scientific and Practical Conference: Research, Development and Application High Tehnologies in Industry
    Publikacija 10th International Scientific and Practical Conference „Research, Development and Application High Technologies in Industry“, 2011, ISBN 978-5-7422-3022-9
    Godina 2011
    Autori Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović
    Strana od 120
    Strana do 124

    Identification of face funcionality with program system for purpose of modular fixture design

    Naučni skup 34th International Conference on Production Engineering. Niš,2011
    Publikacija Proceedings 34th International Conference on Production Engineering. Niš,2011, ISBN 978-86-6055-019-6
    Godina 2011
    Autori Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča, and Branislav Sredanović
    Strana od 197
    Strana do 200

    Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation

    Naučni skup 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
    Publikacija Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1
    Godina 2011
    Autori Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča, Branislav Sredanović, and Marko Radisavljević
    Strana od 419
    Strana do 426

    Modeling of dynamical behavior spindle‐holder‐tool assembly

    Naučni skup 34.International Conference on Production Engineering
    Publikacija 34th International Conference on Production Engineering, 2011, ISBN 978-86-6055-019-6
    Godina 2011
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović, and Stevo Borojević
    Strana od 117
    Strana do 120

    Modeling of cutting forces with artificial neural networks

    Naučni skup ICMEN 2011- International Conference on Manufacturing engineering
    Publikacija Proceedings of 4th International Conference on Manufacturing Engineering ICMEN 2011, ISBN 978-960-98780-4-3
    Godina 2011
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, Stevo Borojević, and Valentina Golubović-Bugarski
    Strana od 123
    Strana do 132

    Detection of structural damage location using frequency response function data

    Naučni skup DEMI 2011- 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
    Godina 2011
    Autori Valentina Golubović-Bugarski, Drago Blagojević, Đorđe Čiča, and Branislav Sredanović
    Strana od 129
    Strana do 134

    Algorithm for C1 continuous tool path: some experiences, problems and suggestions

    Naučni skup International Conference on Innovative Technologies - IN‐TECH
    Publikacija International Conference on Innovative Technologies, ISBN 978-80-904502-2-6
    Godina 2010
    Autori Đorđe Čiča, Simo Jokanović, Stevo Borojević, and Branislav Sredanović
    Strana od 160
    Strana do 164

    Senzitivnost funkcije frekventnog odziva sistema glavno vreteno‐držač alata‐alat na promjene parametara veze

    Naučni skup Jupiter konferencija
    Publikacija Zbornik radova 36. Jupiter konferencije, 2010, ISBN 978-86-7083-696-9
    Godina 2010
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, and Branislav Sredanović
    Strana od 3.22
    Strana do 3.27

    Vector based approach in definning of universal machinability

    Naučni skup International Conference on Innovative Technologies IN-TECH 2010
    Publikacija International Conference on Innovative Technologies, ISBN 978-80-904502-2-6
    Godina 2010
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Simo Jokanović, Stevo Borojević, and Đorđe Čiča
    Strana od 326
    Strana do 330

    Modeliranje vretenastih glodala primjenom CAD/CAM sistema

    Naučni skup Jupiter konferencija,
    Godina 2010
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, and Stevo Borojević
    Strana od 3.28
    Strana do 3.31

    Mjerenje ugaonih stepeni slobode metodom konačnih razlika

    Naučni skup International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009 , Banja Luka
    Publikacija Proceedings DEMI 2009, ISBN978-99938-39-15-6
    Godina 2009
    Autori Đorđe Čiča, Milan Zeljković, Valentina Golubović-Bugarski, and Gordana Globočki-Lakić
    Strana od 57
    Strana do 62

    Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja

    Naučni skup 33. savjetovanje proizvodnog mašinstva, 2009
    Publikacija 33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4
    Godina 2009
    Autori Stevo Borojević, Branislav Sredanović, Gordana Globočki-Lakić, and Đorđe Čiča
    Strana od 31
    Strana do 34

    Development of Application for Analysis of Machinability Index

    Naučni skup 11. International Conference on Tribology – Serbiatrib 2009
    Publikacija Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4
    Godina 2009
    Autori Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča, and Branislav Sredanović
    Strana od 251
    Strana do 254

    Identifikacija parametara veze dinamičkih sistema korišćenjem funkcije frekventnog odziva, ISBN 978-86-7083-662-4

    Naučni skup 33. Savjetovanje proizvodnog mašinstva
    Publikacija Zbrornik radova
    Godina 2009
    Autori Đorđe Čiča, Milan Zeljković, Valentina Golubović-Bugarski, and Gordana Globočki-Lakić
    Strana od 165
    Strana do 168

    A mode shape-cahange correlation approach to damage detection

    Naučni skup 26th Danubia-Adria Symposium on Advances in Experimental Mechanics
    Godina 2009
    Autori Valentina Golubović-Bugarski, Drago Blagojević, and Đorđe Čiča
    Strana od 67
    Strana do 68

    Identifikacija strukturnih oštećenja iz modalnih podataka

    Naučni skup DEMI 2009 - 9.Međunarodna konferencija o dostignućima elektrotehnike, mašinstva i informatike – DEMI
    Godina 2009
    Autori Valentina Golubović-Bugarski, Drago Blagojević, and Đorđe Čiča
    Strana od 51
    Strana do 56

    Aplikativni programski interfejs CAD/CAM sistema SolidWorks

    Naučni skup Savjetovanje proizvodnog mašinstva
    Publikacija Zbornik radova 38. Savjetovanje proizvodnog mašinstva
    Godina 2008
    Autori Simo Jokanović and Đorđe Čiča
    Strana od 537
    Strana do 541

    Primjena kružne interpolacije pri CNC obradi složenih površina: iskustva, problemi, moguća rješenja

    Naučni skup 33. Jupiter konferencija
    Publikacija Zbornik radova 33. JUPITER konferencija, ISBN 978-86-7083-592-4
    Godina 2007
    Autori Đorđe Čiča, Simo Jokanović, and Gordana Globočki-Lakić
    Strana od 2.12
    Strana do 2.17

    Razvoj modela za ispitivanje obradivosti teškoobradivih metarijala mjerenjem triboloških karakteristika

    Naučni skup MMA 2006 - 9. Međunaroda naučno-stručna konferencija
    Publikacija Proceedings, MMA 2006, ISBN 86-85211-96-4
    Godina 2006
    Autori Gordana Globočki-Lakić, Bogdan Nedić, Pantelija Dakić, Đorđe Čiča, and Valentina Golubović-Bugarski
    Strana od 63
    Strana do 65

    Possibility of determination of material machinability over tribological parameters by use of tribometer “Block on disk”

    Naučni skup 9th CIRP International Workshop on modeling of machining opreations
    Publikacija Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations, 2006, ISBN 961-6536-06-0
    Godina 2006
    Autori Gordana Globočki-Lakić, Bogdan Nedić, Ivković Branko, Valentina Golubović-Bugarski, and Đorđe Čiča
    Strana od 307
    Strana do 312

    Razvoj modela za ispitivanje obradivosti teškoobradivih materijala mjerenjem triboloških karakteristika

    Naučni skup 9. međunarodna naučno-stručna konferencija MMA
    Publikacija Zbornik radova MMA2006, ISBN 86-85211-96-4
    Godina 2006
    Autori Gordana Globočki-Lakić, Bogdan Nedić, Pantelija Dakić, and Đorđe Čiča
    Strana od 63
    Strana do 65

    Kompleksnost problema definisanja obradivosti materijala

    Naučni skup 31. Savjetovanje proizvodnog mašinstva
    Publikacija Zbornik Radova 31. savjetovanje proizvodnog mašinstva , Kragujevac 2006, ISBN 86-80581-92-5
    Godina 2006
    Autori Gordana Globočki-Lakić, Bogdan Nedić, Pantelija Dakić, Valentina Golubović-Bugarski, and Đorđe Čiča
    Strana od 57
    Strana do 64

    Algoritam za CNC obradu složenih površina sa pretežno kružnim putanjama alata,

    Naučni skup Međunarodna konferencija o dostignućima elektrotehnike, mašinstva i informatike – DEMI,
    Publikacija Zbornik radova DEMI 2005
    Godina 2005
    Autori Đorđe Čiča and Simo Jokanović
    Strana od 197
    Strana do 202

    Algoritam za C(1) putanju alata pri obradi složenih površina

    Naučni skup Jupiter konferencija
    Publikacija Zbornik radova 30. Jupiter konferencija
    Godina 2005
    Autori Simo Jokanović and Đorđe Čiča
    Strana od 3.24
    Strana do 3.29

    Kompjuterska edukacija u CNC tehnologiji programskim paketom CNC-EDU

    Naučni skup Međunarodni naučno-stručni skup o dostignućima elektro i mašinske industrije – DEMI
    Godina 2001
    Autori Miroslav Matić, Miroslav Rogić, Radovan Martić, and Đorđe Čiča
    Strana od 233
    Strana do 237

Knjige

    Soft computing in advanced cutting processes (Chapter in "Soft Computing in Smart Manufacturing: Solutions toward Industry 5.0", edited by T. Sibalija and J. P. Davim)

    Izdavač De Gruyter, Berlin
    ISBN 978-3-11-069317-1
    Godina 2021
    Autori Branislav Sredanović, Đorđe Čiča, and Davorin Kramar
    Tip knjige ostale naučne publikacije
    Broj strana 71
    Veb adresa https://doi.org/10.1515/9783110693225-007

    Artificial Intelligence Advances in Research and Applications

    Izdavač Nova Science Publishers
    ISBN 9781536126778
    Godina 2018
    Autori Đorđe Čiča and Davorin Kramar
    Tip knjige ostale naučne publikacije

    CAD/CAM sistemi

    Izdavač Univerzitet u Banjoj Luci, Mašinski fakultet
    ISBN 999363979-5
    Godina 2018
    Autori Simo Jokanović and Đorđe Čiča
    Tip knjige osnovni udžbenik
    Broj strana 348

    Mašine alatke

    Izdavač Univerzitet u Banjoj Luci Mašinski fakultet
    ISBN 978-99938-39-70-5
    Godina 2016
    Autori Đorđe Čiča
    Tip knjige osnovni udžbenik
    Broj strana 367

    Programiranje numerički upravljanih mašina alatki

    Izdavač Univerzitet u Banjoj Luci, Mašinski fakultet
    ISBN 978-99938-39-51-4
    Godina 2014
    Autori Đorđe Čiča and Simo Jokanović
    Tip knjige osnovni udžbenik
    Broj strana 257

Projekti

Analiza mogucnosti izrade dijelova gorive celije cvrstog oksida od visokootpornih i teskoobradivih metalnih materijala

Project Number 1256016
Status Aktivan
Type of project Nacionalni naucnoistrazivacki
Organizational unit Masinski fakultet
Head prof. dr Stevo Borojevic
Participants Sasa Tesic
prof. dr Djordje Cica
Gordana Tosic, ma
Jovica Ilic
prof. dr Branislav Sredanovic
Business Partner Ministarstvo za naucnotehnoloski razvoj i visoko obarzovanje Republike Srpske
Beginning of realization 2024-01-01
End of the project 2025-01-01
Project value 6000.0 BAM

Razvoj kucista gorivih celija cvrstog oksida od visokootpornih metalnih materijala

Project Number 1256010
Status Aktivan
Type of project Medjunarodni naucnoistrazivacki - Ostali
Organizational unit Masinski fakultet
Head prof. dr Stevo Borojevic
Participants Sasa Tesic
prof. dr Djordje Cica
prof. dr Branislav Sredanovic
Business Partner Ministarstvo civilnih poslova BiH
Beginning of realization 2023-01-01
End of the project 2024-12-31
Project value 10000.0 BAM

Primjena metoda vjestacke inteligencije pri mikroglodanju superlegura

Project Number 1256006
Status Neaktivan
Type of project Medjunarodni naucnoistrazivacki - Ostali
Organizational unit Masinski fakultet
Head prof. dr Branislav Sredanovic
Participants Sasa Tesic
prof. dr Stevo Borojevic
prof. dr Djordje Cica
Business Partner Ministarstvo za naucnotehnoloski razvoj i visoko obarzovanje Republike Srpske
Beginning of realization 2021-07-01
End of the project 2023-06-30
Project value 4000.0 BAM

PostBANOROB(BLiM) projekt

Project Number 8301009
Status Neaktivan
Type of project Herd
Organizational unit Rektorat
Head prof. dr Simo Jokanovic
Participants prof. dr Gordana Globocki Lakic
prof. dr Djordje Cica
prof. dr Stevo Borojevic
prof. dr Branislav Sredanovic
Business Partner Vlada Norveske ,HERDICT program
Beginning of realization 2015-01-01
End of the project 2016-12-31
Project value 74880.0 BAM