Navigacija

Branislav Sredanović
viši asistent

Saradnik - II-5
Mašinski fakultet
Uža naučna/umjetnička oblast konvencionalne tehnologije
Datum izbora u zvanje 10. septembar 2013.

Predmeti

Mašinski fakultet

M2KPR Konstruisanje pomoću računara
07O3TRB Tribologija
M2RIP Računarom integrisana proizvodnja
07O3TOR Tehnologija obrade rezanjem
07O3OS Obradni sistemi
07O3AP1 Alati i pribori 1
07O3MK3 3D-CAD mašinsko konstruisanje
07O3OSOR Obradni sistemi za obradu rezanjem
M1MS Modeliranje i simulacija
M1AP Alati i pribori
M2PNM Programiranje numeričkih mašina
M1NT Nekonvencionalne tehnologije
M2N Nanotehnologije

Šumarski fakultet

OŠ07TEHC Tehničko crtanje i nacrtna geometrija
OP15TCNG Tehničko crtanje sa nacrtnom geometrijom
OŠ13TEHC Tehničko crtanje

Prirodno-matematički fakultet

1C10TNS1002 Modelovanje i simulacije

Bibliografija

Radovi u časopisima

    Prediction of natural frequencies of the tool controlled mode using soft computing techniques

    Časopis Industry 4.0
    Godina 2017
    Autori Đorđe Čiča, Milan Zeljkovic, Branislav Sredanović i Stevo Borojević
    Volumen 1
    Broj 1
    Strana od 11
    Strana do 14

    Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach

    Časopis International Journal "Machines, Technologies, Materials"
    Godina 2017
    Autori Đorđe Čiča, Branislav Sredanović i Davorin Kramar
    Volumen 4
    Strana od 186
    Strana do 190

    Machinability of C45e Steel - Application of Minimum Quantity Lubrication and High Pressure Jet Assisted Machining Techniques

    DOI 10.21278/TOF.40204
    Časopis TRANSACTIONS OF FAMENA
    Godina 2016
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar i Janez Kopač
    Volumen 40
    Broj 2
    Strana od 45
    Strana do 58

    Design of fuzzy expert system for predicting of surface roughness in high-pressure jet assisted turning using bioinspired algorithms

    DOI 10.1017/S0890060415000189
    Časopis AI EDAM-ARTIFICIAL INTELLIGENCE FOR ENGINEERING DESIGN ANALYSIS AND MANUFAC
    Godina 2016
    Autori Davorin Kramar, Đorđe Čiča, Branislav Sredanović i Janez Kopac
    Volumen 30
    Broj 1
    Strana od 96
    Strana do 106

    Analysis of Micro-Milling of Hardened Tool Steel

    DOI 10.4028/www.scientific.net/KEM.686.57
    Časopis Key Engineering Materials
    Godina 2016
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Volumen 686
    Strana od 57
    Strana do 62

    Dynamic analysis of spindle-holder-tool assembly

    Časopis Machine Design
    Godina 2016
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
    Volumen 8
    Broj 2
    Strana od 53
    Strana do 56

    Identification of dynamical contact parameters for spindle-holder-tool assembly

    Časopis Journal of Production Engineering
    Godina 2016
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
    Volumen 19
    Broj 1
    Strana od 57
    Strana do 60

    Comparative Study of ANN and ANFIS Prediction Models For Turning Process in Different Cooling and Lubricating Conditions

    DOI 10.4271/2015-01-9082
    Časopis International Journal of Materials and Manufacturing
    Godina 2015
    Autori Branislav Sredanović i Đorđe Čiča
    Volumen 8
    Broj 2
    Strana od 586
    Strana do 591

    High Pressure Jet Assisted Machining – Application in Turning

    Časopis Tribological Journal BULTRIB
    Godina 2015
    Autori Gordana Globočki-Lakić i Branislav Sredanović
    Volumen 5
    Broj 5
    Strana od 111
    Strana do 118

    Modelling of tool life and surface roughness in hard turning using soft computing techniques: a comparative study

    Časopis INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
    Godina 2015
    Autori Đorđe Čiča, Branislav Sredanović i Davorin Kramar
    Volumen 50
    Broj 1
    Strana od 49
    Strana do 64

    Analysis of effectiveness on production system for production of the tools for hydraulic press brakers

    Časopis ANNALS OF FACULTY ENGINEERING HUNEDOARA – International Journal Of Engineering
    Godina 2014
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
    Volumen 12
    Broj 2
    Strana od 127
    Strana do 132

    Prediction of cutting zone temperature in high-pressure assisted turning using GA and PSO based ANN

    Časopis Journal of production engineering
    Godina 2014
    Autori Đorđe Čiča, Branislav Sredanović i Davorin Kramar
    Volumen 17
    Broj 1
    Strana od 43
    Strana do 46

    Experimental research using of MQL in metal cutting

    Časopis TRIBOLOGY IN INDUSTRY
    Godina 2013
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić i Janez Kopač
    Volumen 35
    Broj 4
    Strana od 276
    Strana do 258
    Veb adresa http://www.tribology.fink.rs/

    Modeling of the Cutting Forces in Turning Process Using Various Methods of Cooling and Lubricating: An Artificial Intelligence Approach

    DOI 10.1155/5263
    Časopis Advances in Mechanical Engineering
    Godina 2013
    Autori Đorđe Čiča, Branislav Sredanović, Gordana Globočki-Lakić i Davorin Kramar
    Volumen 2013
    Strana od 1
    Strana do 8
    Veb adresa http://dx.doi.org/10.1155/2013/798597

    Influence of Different Cooling and Lubrication Techniques on Material Machinability in Machining

    Časopis STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING
    Godina 2013
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča i Davorin Kramar
    Volumen 59
    Broj 12
    Strana od 748
    Strana do 754
    Veb adresa http://www.sv-jme.eu/home/

    Contribution to material machinability definition

    Časopis Journal of production engineering
    Godina 2012
    Autori Davorin Kramar, Branislav Sredanović, Gordana Globočki-Lakić i Janez Kopač
    Volumen 15
    Broj 2
    Strana od 27
    Strana do 32
    Veb adresa http://www.jpe.ftn.uns.ac.rs/

    Modelling of dynamical behavior of a spindle-holder-tool assembly

    Časopis STROJARSTVO
    Godina 2012
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić i Branislav Sredanović
    Volumen 54
    Broj 2
    Strana od 135
    Strana do 144

    Identification of contact parameters of a spindle-holder-tool assembly using artificial neural networks

    Časopis Journal of production engineering
    Godina 2012
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović i Stevo Borojević
    Volumen 15
    Broj 2
    Strana od 37
    Strana do 40

    Development of mathematical model of universal material machinability

    Časopis JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION
    Godina 2011
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Bogdan Nedić, Đorđe Čiča i Dobrivoje Ćatić
    Volumen 17
    Broj 4
    Strana od 501
    Strana do 511

    Development of Application for Analysis of Machinability Index

    Časopis TRIBOLOGY IN INDUSTRY
    Godina 2009
    Autori Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča i Branislav Sredanović
    Volumen 31
    Broj 1&2
    Strana od 57
    Strana do 60

Radovi sa skupova

    An Integration of Bio-inspired Algorithms and Fuzzy Logic for Tool Wear Estimation in Hard Turning

    Naučni skup 5th International Conference on Advanced Manufacturing Engineering and Technologies NEWTECH 2017
    Godina 2017
    Autori Đorđe Čiča, Branislav Sredanović, Stevo Borojević i Davorin Kramar
    Strana od 1
    Strana do 12

    Estimation of cutting forces in high pressure jet assisted turning using PSO and SA based approach

    Naučni skup INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY
    Godina 2017
    Autori Đorđe Čiča, Branislav Sredanović i Davorin Kramar
    Strana od 75
    Strana do 79

    Prediction of natural frequencies of the tool controlled mode using soft computing techniques

    Naučni skup International Scientific Conference Industry 4.0
    Godina 2016
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
    Strana od 22
    Strana do 25

    A predictive model of cutting forces in MQL turning usig genetic algorithm

    Naučni skup 3rd International scientific conference COMETa
    Godina 2016
    Autori Đorđe Čiča, Branislav Sredanović i Davorin Kramar
    Strana od 237
    Strana do 242

    Application of micro -cutting in machining of hard-to-machine materials

    Naučni skup IX international scientific conference "Contemporary materials 2016", 4-5. Septembre 2016, Banja Luka,
    Publikacija IX international scientific conference "Contemporary materials 2016", Banja Luka, 2016
    Godina 2016
    Autori Branislav Sredanović, Gordana Globočki-Lakić i Janez Kopač

    Analysis of Micro-Milling of Hardened Tool Steel

    Naučni skup 8th International Congress on Precision Machining ICPM 2015
    Publikacija Proceedings of 8th International Congress on Precision Machining ICPM 2015, Novi Sad, Serbia, ISBN 978-86-7892-742-3
    Godina 2015
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 57
    Strana do 62

    Identification of dynamical contact parameters for spindle-holder-tool assembly

    Naučni skup International Scientific Conference MMA 2015 - Flexible Technologies
    Godina 2015
    Autori Đorđe Čiča, Milan Zeljković, Branislav Sredanović i Stevo Borojević
    Strana od 67
    Strana do 71

    Modelling of Tool Wear in Turning Bearing Steel Using Carbide Tool and HPJAM Technique

    Naučni skup DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology
    Publikacija Proceedings, DEMI 2015, ISBN 978-99938-39-53-8
    Godina 2015
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 293
    Strana do 299

    Specifics of The Design for CNC Plasma Cutting

    Naučni skup DEMI 2015 - 12th International Conference on Accomplishments in Eletrical and Mechanical Engineering and Information Tehnology, Banja Luka
    Publikacija Proceedings, 2015., ISBN 978-99938-39-53-8
    Godina 2015
    Autori Bogdan Nedić, Marko Janković, Milan Erić, Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 241
    Strana do 249

    New trends in cutting technologies: application of high pressure jet assisted machining, ISBN: 978-86-7083-857-4

    Naučni skup 14th International Conference on Tribology SERBIATRIB 2015
    Publikacija Proceedings
    Godina 2015
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 367
    Strana do 375

    The importance of modeling in the study of machinability

    Naučni skup 5th International Conference on Manufacturing Engineering - ICMEN
    Publikacija Proc. of 5th International Conference on Manufacturing Engineering ICMEN 2014, ISBN 978-960-98780-9-8
    Godina 2014
    Autori Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 1
    Strana do 12

    Modeliranje otpora rezanja pri struganju čelika C45E primjenom HPJAM tehnike hlađenja i podmazivanja

    Naučni skup 39. Jupiter konferencija
    Publikacija Zbornik 39. konferencije sa međunarodnim učešćem JUPITER 2014, ISBN 978-86-7083-838-3
    Godina 2014
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 130
    Strana do 135

    Effects of using of MQL technique in metal cutting

    Naučni skup International Conference on Tribology - SERBIATRIB 2013
    Publikacija Proc. of 13th International Conference on Tribology SERBIATRIB 2013, ISBN 978-86-86663-98-6
    Godina 2013
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Davorin Kramar, Bogdan Nedić i Janez Kopač
    Strana od 276
    Strana do 285

    Cutting Force Modeling in Hard Alloy Steel Turning

    Naučni skup International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology
    Publikacija Proceedings of 11th International Conference DEMI 2013, ISBN 978-99938-39-46-0
    Godina 2013
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Davorin Kramar i Janez Kopač
    Strana od 389
    Strana do 396

    Analysis of effectiveness on production system for production of the tools for hydraulic press brakers

    Naučni skup 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
    Publikacija Proceedings of 11th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology, ISBN 978-99938-39-46-0
    Godina 2013
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
    Strana od 283
    Strana do 291

    A novel method for material machinability evaluation

    Naučni skup International Conference of Sustainable Life in manufacturing - SLIM 2013
    Publikacija Proceedings of 4th International Conference odf Sustainable Life in maufacturing SLIM 2013, ISBN 978-961-6536-67-7
    Godina 2013
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča i Stevo Borojević
    Strana od 110
    Strana do 116

    Contribution to material machinability definition

    Naučni skup 3th International Conference of Sustainable Life in manufacturing - SLIM 2012
    Publikacija Proc. of 3rd International Conference of Sustainable Life in Manufacturing SLIM 2012
    Godina 2012
    Autori Davorin Kramar, Branislav Sredanović, Gordana Globočki-Lakić i Janez Kopač
    Strana od 28
    Strana do 33

    Usaglašavanje jednoosovinskih traktroskih prikolica sa zahtjevima direktiva i standarda EU

    Naučni skup 10. međunarodna konferencija Održavanje i proizvodni inženjering,2012
    Publikacija Zbornik radova 10.međunarodne konferencije Održavanje i proizvodni inženjering, KODIP 2012, ISBN 978-9940-527-24-2
    Godina 2012
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki -Lakić i Branislav Sredanović
    Strana od 203
    Strana do 209

    Efekti primjene programskog sistema CATIA u procesu izrade programa za numeričke mašine

    Naučni skup 38. Jupiter konferencija, 2012
    Publikacija Zbornik radova 38. konferencije sa međunarodnim učešćem JUPITER 2012, ISBN 978-86-7083-757-7
    Godina 2012
    Autori Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 1
    Strana do 8

    Application of CAD/CAM systems for machining parts of aluminium profiles

    Naučni skup International scientific conference MMA 2012– Advanced Production Technologies
    Publikacija 11th International scientific conference MMA – Advanced Production Technologies, ISBN 978-86-7892-419-4
    Godina 2012
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Đorđe Čiča i Aleksandar Milutinović
    Strana od 227
    Strana do 231

    Identification of contact parameters of spindle‐holder‐tool assembly using artificial neural networks

    Naučni skup International scientific conference MMA 2012 – Advanced Production Technologies
    Publikacija Proc. of 11th International Scientific Conference on Advanced Production Technologies MMA 2012, ISBN 978-9940-527-24-2
    Godina 2012
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović i Stevo Borojević
    Strana od 57
    Strana do 61

    Analiza obradivosti materijala pomoću aplikativnog računarskog programa

    Naučni skup 10. međunarodna konferencija Održavanje i proizvodni inženjering KODIP 2012
    Publikacija Zbornik radova, KODIP 2012, ISBN978-9940-527-24-2
    Godina 2012
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Stevo Borojević, Đorđe Čiča i Vid Jovišević
    Strana od 81
    Strana do 88

    Development of DamageCALC application for automatic calculation of damage indicator

    Naučni skup DIPRE - 3th International Conference on Diagnosis and Prediction in Mechanical Engineering System
    Publikacija Proc. of 3rd International Conference on Diagnosis and Prediction Mechanical Engineering System DIPRE 12
    Godina 2012
    Autori Valentina Golubović-Bugarski, Branislav Sredanović i Gordana Globočki-Lakić
    Strana od 1
    Strana do 6

    Optimizacija procesa proizvodnje primjenom programskog paketa Tecnomatix Plant Simulation

    Naučni skup 37. Jupiter konferencija,2011
    Publikacija Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN 978-86-7083-724-9
    Godina 2011
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 8
    Strana do 15

    Laboratories under requirements of directives and standards of European Union

    Naučni skup 10th International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology
    Publikacija Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1
    Godina 2011
    Autori Vid Jovišević, Stevo Borojević, Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 361
    Strana do 366

    Novi pristup definisanja univerzalne obradivosti pri obradi rezanjem

    Naučni skup Jupiter konferencija
    Publikacija Zbornik radova 37. konferencije sa međunarodnim učešćem JUPITER 2011, ISBN978-86-7083-724-9
    Godina 2011
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Bogdan Nedić i Đorđe Čiča
    Strana od 109
    Strana do 114

    Application of artificial intelligence in modeling of metal cutting process

    Naučni skup 10th International Scientific and Practical Conference: Research, Development and Application High Tehnologies in Industry
    Publikacija 10th International Scientific and Practical Conference „Research, Development and Application High Technologies in Industry“, 2011, ISBN 978-5-7422-3022-9
    Godina 2011
    Autori Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
    Strana od 120
    Strana do 124

    Identification of face funcionality with program system for purpose of modular fixture design

    Naučni skup 34th International Conference on Production Engineering. Niš,2011
    Publikacija Proceedings 34th International Conference on Production Engineering. Niš,2011, ISBN 978-86-6055-019-6
    Godina 2011
    Autori Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča i Branislav Sredanović
    Strana od 197
    Strana do 200

    Selection of variant for material flow type in conditions of group approach using the software system tecnomatix plant simulation

    Naučni skup 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
    Publikacija Proc. of 10th Anniversary International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2011, ISBN978-99938-39-36-1
    Godina 2011
    Autori Stevo Borojević, Vid Jovišević, Gordana Globočki-Lakić, Đorđe Čiča, Branislav Sredanović i Marko Radisavljević
    Strana od 419
    Strana do 426

    Modeling of dynamical behavior spindle‐holder‐tool assembly

    Naučni skup 34.International Conference on Production Engineering
    Publikacija 34th International Conference on Production Engineering, 2011, ISBN 978-86-6055-019-6
    Godina 2011
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić, Branislav Sredanović i Stevo Borojević
    Strana od 117
    Strana do 120

    Modeling of cutting forces with artificial neural networks

    Naučni skup ICMEN 2011- International Conference on Manufacturing engineering
    Publikacija Proceedings of 4th International Conference on Manufacturing Engineering ICMEN 2011, ISBN 978-960-98780-4-3
    Godina 2011
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča, Stevo Borojević i Valentina Golubović-Bugarski
    Strana od 123
    Strana do 132

    Detection of structural damage location using frequency response function data

    Naučni skup DEMI 2011- 10th International conference on accomplisments in Electrical and Mechanical Engineering and Information Technology
    Godina 2011
    Autori Valentina Golubović-Bugarski, Drago Blagojević, Đorđe Čiča i Branislav Sredanović
    Strana od 129
    Strana do 134

    Quality monitoring of production systems and processes in form of vector of power

    Naučni skup International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry
    Publikacija Proc. of 9th International Scientific and Practical Conference on Research, Development and Application High Technologies in Industry, ISBN 978-5-7422-2557-7
    Godina 2010
    Autori Branislav Sredanović i Gordana Globočki-Lakić
    Strana od 418
    Strana do 420

    Senzitivnost funkcije frekventnog odziva sistema glavno vreteno‐držač alata‐alat na promjene parametara veze

    Naučni skup Jupiter konferencija
    Publikacija Zbornik radova 36. Jupiter konferencije, 2010, ISBN 978-86-7083-696-9
    Godina 2010
    Autori Đorđe Čiča, Milan Zeljković, Gordana Globočki-Lakić i Branislav Sredanović
    Strana od 3.22
    Strana do 3.27

    Vector based approach in definning of universal machinability

    Naučni skup International Conference on Innovative Technologies IN-TECH 2010
    Publikacija International Conference on Innovative Technologies, ISBN 978-80-904502-2-6
    Godina 2010
    Autori Gordana Globočki-Lakić, Branislav Sredanović, Simo Jokanović, Stevo Borojević i Đorđe Čiča
    Strana od 326
    Strana do 330

    Algorithm for C1 continuous tool path: some experiences, problems and suggestions

    Naučni skup International Conference on Innovative Technologies - IN‐TECH
    Godina 2010
    Autori Đorđe Čiča, Simo Jokanović, Stevo Borojević i Branislav Sredanović
    Strana od 160
    Strana do 164

    Modeliranje vretenastih glodala primjenom CAD/CAM sistema

    Naučni skup Jupiter konferencija,
    Godina 2010
    Autori Branislav Sredanović, Gordana Globočki-Lakić, Đorđe Čiča i Stevo Borojević
    Strana od 3.28
    Strana do 3.31

    Projektovanje i proračun obimnog glodala primjenom savremenih programskih sistema

    Naučni skup International Conference on Accomplishments in Electrical and Mechanical Engineering and Information Technology DEMI 2009
    Publikacija Zbornik radova 9. međunarodne konferencije o dostignućima elektrotehnike, mašinstva i informatike DEMI 2009, ISBN 978-99938-39-15-6
    Godina 2009
    Autori Branislav Sredanović, Gordana Globočki-Lakić i Stevo Borojević
    Strana od 255
    Strana do 260

    Analiza indeksa obradljivosti aluminijumskih legura primjenom aplikativnog programskog rješenja

    Naučni skup 33. savjetovanje proizvodnog mašinstva, 2009
    Publikacija 33. savjetovanje proiyvodnog ma[instva, 2009, ISBN 978-86-7083-662-4
    Godina 2009
    Autori Stevo Borojević, Branislav Sredanović, Gordana Globočki-Lakić i Đorđe Čiča
    Strana od 31
    Strana do 34

    Development of Application for Analysis of Machinability Index

    Naučni skup 11. International Conference on Tribology – Serbiatrib 2009
    Publikacija Proceedings 11th International Conference on Tribology SEBIATRIB 09, ISBN 978-86-7083-659-4
    Godina 2009
    Autori Gordana Globočki-Lakić, Stevo Borojević, Đorđe Čiča i Branislav Sredanović
    Strana od 251
    Strana do 254

Ostali radovi

    Preliminary experimental research on micro-milling, report

    Godina 2013
    Autori Branislav Sredanović, Matija Hriberšek, Davorin Kramar, Gordana Globočki-Lakić i Janez Kopač
    Strana od 1
    Strana do 13

    Contribution to defining of universal machinabilty, report

    Godina 2012
    Autori Branislav Sredanović, Davorin Kramar, Gordana Globočki-Lakić i Janez Kopač
    Strana od 1
    Strana do 26

    Experimental investigation of turning of 100Cr6 steel with the SECO carbide inserts, report

    Godina 2012
    Autori Branislav Sredanović, Davorin Kramar, Gordana Globočki-Lakić i Janez Kopač
    Strana od 1
    Strana do 10

Knjige

    Alati i pribori u obradi rezanjem

    Izdavač Univerzitet u Banjoj Luci, Mašinski fakultet
    ISBN 978-99938-39-68-2
    Godina 2016
    Autori Gordana Globočki -Lakić i Branislav Sredanović
    Tip knjige osnovni udžbenik
    Broj strana 514

    Praktično projektovanje pomoću računara u paketu SOLIDWORKS

    Izdavač Mašinski fakultet Banja Luka
    ISBN xxx
    Godina 2014
    Autori Branislav Sredanović, Živko Babić i Simo Jokanović
    Tip knjige ostale nastavne publikacije
    Broj strana 253